Upgraded Balanced Reference Phonostage
ACCU UPGRADE FOR BALANCED REFERENCE PHONO £ 2,670.00
Power Supply +
Clearaudio can now offer the Balanced Reference Phonostage in a package incorporating our innovative charging system - the "ACCU" technology.
This charging technology, in combination with selected and formatted NiMH high performance batteries guarantee that no noise or distortion from the mains supply can pollute the delicate phono signal.
Technical specifications Power Supply:Input 115 V / 230 V selectable by switch inside the power supply
Output +/- 10 V and +/- 17 VSignal to noise ratio:75 dB(A), G=60 dBChannel separation:> 90 dBGain / Amplification:(1 kHz) 30 dB - 63 dB selected by rotary switchClipping limit:(1 kHz) G=60 dB, 11mVDistortion:(1 kHz) less than < 0.001 %Input impedance:adjustable from 0 Ohms to 47 kOhmsOutput impedance:50 OhmSystem response:RIAA / DIN IEC 98
+/- 1 dB toleranceFrequency response:10 Hz - 100 kHz / - 0.1 dBIn- and Outputs XLR:Pin 1 = GND (Shield)
Pin 2 = Hot (+)
Pin 3 = Cold (-)5-pin Binder-connector:Pin 1 = Hot (+)
Pin 2 = Cold (-)
Pin 3 = GND (Shield)
Pin 4 + 5 = n.c.Power Supply 9-pin. D-SUB-Connector:Pin 1 = -10 V, Pin 2 = +10 V
Pin 3 = -17 V, Pin 4 = +17 V, Pin 5 = free
Pin 6 - 9 = GNDWarranty*:5 Years
*Only if the warranty card is filled out correctly and sent back within 2 weeks to clearaudio
"ACCU" - Power Supply devices
(one "ACCU-device" is supplied for each channel of the Balanced Reference Phonostage):Power supply:see "+" phonostage power supply unitOutput voltage:2 x 18 Volt battery supply (for each device)Battery charge:The innovative circuit design of the "ACCU+ Power Supply" realizes automatically when the batteries need to be charged thus protecting the NiMH batteries against total discharge.Dimensions (HxWxD):approx. 56 x 102 x 185 mm (for each device)Weight:approx. 1.2 kg (approx. 1.7 kg with package) (for each device)Warranty*:3 Years
*Only if the warranty card is filled out correctly and sent back within 2 weeks to clearaudio